Pick Your Calculator
Select any tool below to get instant material and cost estimates for your project.
Asphalt Calculator
Calculate tons, cubic yards, and total cost for driveways, parking lots, and roads.
Concrete Calculator
Estimate cubic yards, bag count, and ready-mix cost for slabs, footings, and columns.
Asphalt Millings Calculator
Estimate tons and cost of recycled asphalt millings for driveways and paths.
Gravel Calculator
Find cubic yards, tons, and bags of gravel needed for driveways, drainage, and landscaping.
Topsoil Calculator
Calculate cubic yards and bags of topsoil for lawns, gardens, and raised beds.
Driveway Cost Calculator
Full driveway paving estimate including material, delivery, waste factor, labor and tax.
Sealcoat Calculator
Estimate gallons of sealcoat and total cost to protect and extend your asphalt surface.
Whatnot Fee Calculator
See Whatnot commission, payment processing, net payout, profit and break-even price for any sale.
Aquarium Stocking Calculator
Check how many fish your tank can hold based on its size and the species you want to keep.
Which Calculator Do I Need?
Not sure where to start? Match your project to the right tool.
| Your project | Best calculator | What you get |
|---|---|---|
| Paving a driveway or parking lot | Asphalt Calculator | Tons and cubic yards of asphalt |
| Pricing a whole driveway project | Driveway Cost Calculator | Material, delivery, tax, optional labor and prep |
| Gravel driveway, base or drainage | Gravel Calculator | Cubic yards, tons, bags and cost |
| Low-cost recycled driveway surface | Asphalt Millings Calculator | Tons and cost of millings |
| Slab, patio, footing or post | Concrete Calculator | Cubic yards, bags and ready-mix cost |
| Lawn, garden bed or raised bed | Topsoil Calculator | Cubic yards, bags, bagged vs bulk cost |
| Protecting an asphalt surface | Sealcoat Calculator | Gallons and cost of sealcoat |
| Selling on Whatnot | Whatnot Fee Calculator | Fees, net payout, profit and break-even price |
| Stocking a fish tank | Aquarium Stocking Calculator | How many fish your tank can hold |
Many projects need two tools. A new driveway often starts with the gravel base, then asphalt on top, then sealcoat after it cures. Not sure how much concrete you need? Read our guide on how to calculate concrete.
Three Steps to Your Estimate
Our calculators are designed to be fast, accurate, and easy to use on any device.
Enter Dimensions
Type in your project length, width, and depth. Tools that support it let you switch between Imperial and Metric units.
Set Your Prices
Add your local material price per ton or yard. Include optional delivery fees and tax for a full picture.
Get Instant Results
See tons, cubic yards, and total project cost in seconds. Use it as a planning estimate before ordering.
How We Calculate Your Estimate
Every tool starts with volume, then converts to weight or bags.
Volume in cubic feet is length ร width ร depth in feet. Divide by 27 for cubic yards. Weight comes from the material's density, and suppliers sell most bulk material by the ton (2,000 lb).
About 1.96 tons per cubic yard. One ton covers roughly 55 sq ft at 3 inches. See the asphalt calculator.
About 2,800 lb per cubic yard. One cubic yard covers roughly 81 sq ft at 4 inches. See the gravel calculator.
The base for concrete, topsoil and gravel volumes, and for converting bags to yards. See the topsoil calculator.
Order extra for edges, spillage and uneven ground. Compacted base needs more.
Formulas use standard unit conversions such as those in the Penn State Superpave field handout. Material density varies by mix and moisture, so confirm it with your supplier. Results are planning estimates only; see our Disclaimer.
How to Get an Accurate Estimate
Measure every section and split curved or irregular areas into simple shapes.
Use the compacted thickness you want, not the loose depth you pour or spread.
Ask your supplier for the mix or material weight and adjust the calculator if it differs.
Delivery, labor and site prep are separate costs. The driveway cost calculator lets you add them.
Frequently Asked Questions
Yes, completely free. No sign up, no subscription, no hidden fees. Every tool on Free Asphalt Calculators is free to use unlimited times on any device.
The calculators use standard volume and weight formulas, so accuracy depends mainly on your measurements and the material density. We recommend adding a 5โ10% waste factor to your final order and confirming quantities with your supplier.
For a paved driveway use the Asphalt Calculator for tons or the Driveway Cost Calculator for a fuller estimate. For an unpaved driveway use the Gravel Calculator or the Asphalt Millings Calculator. For a slab driveway use the Concrete Calculator.
Add about 5โ10% for waste on most projects. Compacted gravel base needs more, often 15โ20%, because it shrinks when compacted. Topsoil settles after watering, so add at least 10%.
Yes. Every tool is designed to work on phones, tablets, and desktops, so you can use it right on the job site.
Yes, for planning. For large commercial pours or paving jobs, confirm quantities, thickness and base design with your supplier or a qualified paving professional before ordering.
The material calculators estimate material costs only. The Driveway Cost Calculator lets you add optional labor and site prep. Permits, equipment rental and contractor margins vary by location.